วันอังคารที่ 28 มีนาคม พ.ศ. 2560

Digital Shore A Durometer

Digital Shore A Durometer



        Digital Shore A hardness meter testers are used to measure the hardness of material such as rubber and plastics according to ISO 868-1986 and ISO 7619 and able to use as portable or desktop. It has 8.1 Newton total measure force, one kilograms outside pressure, pressure needle top cone angle of 35°, 2.5 millimetre needle length, 0~100HA dial scale and and features large LCD display for the sake of reading.

        Digital Shore A meter corresponds and meet the rigorous standards of ISO 868-1986 for Plastics and Rigid rubber and ISO 7619 Rubber in measuring indentation's hardness as well as GB/T 531.1-2008 standard. Particularly in the materials technology hardness plays a huge role. The measured hardness of a material itself makes predictable conclusions on its characteristics e.g. about how quickly it breaks or is being scratched.

         Digital Shore A durometers is applicable to test the penetration medium hardness of rubber, plastic, leather, multi-grease, wax, etc.

NOTE:


  • A minimum thickness of six millimetre as sample test probes is recommended for
    measurement's optimal results (if its less you may add more layer but
    should be not more than three layers) and measuring point of at least
    eighteen millimetre distance from the outside edges.
  • It is recommended that measurements be made with the type D 
    durometer when the value is above 90 HA

    Features:
    • Digital Shore A Durometer is Wide measuring range with high resolution and ease of operation
    • Hold Function, holds measured value is available.
    • With Zero setting button.
    • Clear test value
    • Dial Scale is 0 -100 HA
    • High grade probe with 0 - 2.5 millimetre Pointer journey
    • Stress at the end of pointer : 8.1 Newton.
    • Small in the dimension, lightweigt and can easily be transported
    • 35º included angle with 0.5 HA resolution
    • Delivers ultra accurate reading with no guessing error
    • Easy to read large LCD display
    • Only one Battery operated
    • Maintenance - free digital display
    • Type A durometers is applicable to test the penetration medium hardness of rubber, plastic, leather, multi-grease, wax, etc.

      NOTE:
      • A minimum thickness of six millimetre as sample test probes is recommended for
        measurement's optimal results (if its less you may add more layer but
        should be not more than three layers) and measuring point of at least
        18mm distance from the outside edges.
      • It is recommended that measurements be made with the type D 
        durometer when the value is above 90 HA

    Specifications of Digital Shore A Durometer
    • Resolution : 0.5 HA
    • Total measure force : 8.1 Newton
    • Outside pressure : 1 kilograms
    • Pressure needle top cone angle of 35°
    • Needle length : 2.5 millimetre
    • Flat cone point: φ0.79 millimetre diameter
    • Dial Scale : 0~100HA
    • On/Off Switch















ไม่มีความคิดเห็น:

แสดงความคิดเห็น